Shopping Bag
EDF Jet Extender 10 Glider
EDF Jet Extender 10 Glider

EDF Jet Extender 10 Glider

Your Price: U$1,399.00
Back Order
Part Number:Jet extender 10 Glider
Jet Extender 10 Glider, retractable EDF self launch system

Tecnical Data:

-Suitable for Gliders up to 11kg all up weight
-Recommended Cell count (Lipo): 10-12
-Current A: 70A on 10S, 93A on 12S
-Max. Thrust: 5,5 kg on 12S
-Max power rating: 4250W
-Weight: only 940g (2lbs)
-Very quiet sound (it sounds like a real gas turbine)
-No CG shift
-Suitable for Aerobatics or Jet style Flying as well for Climb out and Thermal soaring
-Carbon-Aluminium Mechanism with 6 Ball Bearings
-Extends and retracts during under any flying condition and even under high g-force loads
-Smart Electronic Sequencer with Safety Functions and 1 or 2 channel operation mode (pre-programmed, plug and fly)
-Made in Germany
-Delivery: Completely assembled with High End Carbon-Aluminum Mechanism, with Carbon HST EDF and Motor, with Spindle, Spindle-motor and completely pre-programmed sequencer

Glider Version: Here the mechanism is in front of the edf unit and everything is designed to greatly fit into the narrow fuselages like the ASW, DG, ASH, etc.. To keep unit compact the esc will not move in and out together with the edf unit. On these models, the purpose of this unit is to climb to altitude for thermal flying and where long full throttle runs are not needed. It is suitable for most gliders in the 1:4 scale size.

This retractable edf unit makes a break through into a new dimension of dynamic soaring. Aerobatic gliders and any modern high performance glider can perform spectacular flights. It allows fast aerobatics as well as high-speed flights with an absolute jet feeling (and the sound), It also allows for long thermal flights after a quick climb. A 10kg (22lbs) glider reaches 250m height in about 15 seconds.

The carbon-aluminum mechanism is about it all. Whenever you want, you may extend or retract the edf unit or extend, even during heavy aerobatics, outside loop or inverted spins. The multiple ball bearings guided tracks are accurately positioned in seconds by the included sequencer.

The sequencer is included with the unit and already pre-programmed, no need to set anything.
You can choose between (1) channel operation (1 switch for extension and a motor) or 2 channel operation (1 switch for extension and a proportional channel for throttle). It has numerous safety features that ensure that the engine only starts when the edf is fully extended, when retracting the motor is switched off and after short pause, the retraction of the edf unit automatically starts.

The carbon edf unit is manufactured according to the latest technology and integrated into the mechanism.

The engine noise is barely distinguishable from turbine. It has a very low and relatively quiet sound, and no high pitch sound, like we are used from edf jets.

Due to the very low position of the edf unit on the fuselage almost no pitching moment is present, the model flies very neutral, as it would be pulled by a system in the nose.

If you are looking for the ultimate in power kick and at the same time a reasonable all-purpose unit for your glider, then you will love the JetExtender 10


Jet Extender Installation
Back Order

Related Items