dm2 (229 sq. in.)
g/dm2 (3.9 oz/sq. ft.)
g (6.3 oz)
and micro receiver
axi 2203/46, A 7 esc, 2-3 S 120-360mAh, 3 servos TS1002
The new Crack Yak EPP range are top and bottom printed 3D foamies with a 31.5"/800mm wingspan designed for 60-80W brushless motors and 3 servos.
RC Factory Crack Yak is produced entirely from EPP and has a target
flying weight of 160-200g (5.64-7.05oz). The 31.5"/800m wing is flat, no airfoil. These models are designed to be built quickly.
Due to the entirely pre-printed EPP components, as well as
carbon and spruce reinforcements
it only takes about 2 evenings to build this very robust and
Over 15 minutes flying fun with Lithium-polymer batteries!
Kit contents: Pre-printed and pre-cut EPP components for fuselage,
wings, tail plane,
wing spar, struts and
pushrods, landing gear, hardware.
Extremely well balanced model: can be flown extremely slowly and is very robust
Incredible flying manoeuvres, no matter whether flown indoors or
No space is too small, no door frame too tight, no manoeuvre too crazy
Complete combo package available upon request
Crack Yak 55 , in either Gold or Blue
Data sheet, build video1, build video2, vid3, vid4