This series has been developed for smaller models.
The receiver for connecting 6 servos is an extremely sensitive
high-quality 2.4 Dual FHSS 12-channel receiver with enormous
The signal packets from the antenna are continuously evaluated and assessed for completeness and validity.
This and other controller functions are handled by a 32-bit ARM
processor. Each channel can be programmed separately for failsafe.
The receivers of the 2.4 Dual FHSS “Clever” series, like the
large onboard electronics, are designed for maximum security. This
includes: a watchdog function, complex fault clearance at outputs, high
current carrying capacity, 5 Volt signal voltage, operating voltage 4 to
Naturally the “Clever” series is fully updatable and programmable and is equipped with the weatronic® telemetry functions.
Transmission: Adaptive Frequency Hopping
Frequency Range: 2,401 - 2,4835 GHz
Hopping-Frequency:81, in France: 52
Hopping-Speedt: 10 ms
Receive Sensitivity: -100 dBm
Output: 20 dBm (100 mW)
Range: < 1500 m
Antenna:1 x 90 mm - effective antenna length: 29 mm
Resolution control channels: 4096 Steps
Operating Voltage: 4.0 - 10.0 Volt
Current consumption: Max. 130 mA
Current load: Max. 5 A continuous Current
Temperature Range:-10° C bis +60° C
Dimensions: 46,5 x 24,1 x 13,1 mm
Weight: 9 g
Feedback channel for telemetry
and sensor data:Standard: Battery voltage, signal quality
Firmware: Updateable via USB-Adapter
Dual Receiver Clever 6
Clever Quick Guide