dm2 ( in2)
12 kg (26 lbs)
Mini to micro servos for the wings.
The Antares 20E is a high performance open class glider. We at ICARE
are very proud to offer here a (1:3) scale reproduction of
this very high performance
With a span of 6.6 meters this 1:3 scale
Antares 20E is a very fine scale glider. The model has been made in a full
carbon version, hollow molded for maximal torsional stiffness.
All moulds CNC machined and takes over building
techniques from the F3B category. Chosen airfoil has been is optimized
for GPS triangle racing, but the airframe has excellent handling for
thermal flying, and low speed. The cockpit comes finished with with instrument
mushrooms complete with instruments. Scale
retract is installed. All that remains for the builder to do is add a scale pilot for
This glider comes
completely built, and ready for radio installation. Only a few hours are
required, before you go to the field. The moulded wings are very
stiff. Because to the thin airfoil, they come with a double carbon
lay-up, and an optional UHM version is possible for increased stiffness. Airbrakes
installed and ready to be connected by the mean of a mini servo.
flaps are live hinged ready to hook up. The high
gloss, gel coated Fiberglas fuselage has the wing joiner carrying tubes,
and elevator installed. The cockpit comes with all main components like
the instrument mushrooms,
seats, head rests done. Canopy comes fitted.
Landing retractable wheel comes are installed and ready to work,
like the tow release. A small package hardware and short building
instructions are completing the kit. If you would like to venture into
large scale gliders this Antares 20E is a must!
Radio requirements are:
- Aero tow system:
1x standard servo.
- Ailerons: 2x micro servo (for example servo JR-DS378 ).
- Flaps: 4x micro servo (for example servo JR-DS378).
- Airbrakes: 2x standard servo (15mm thick).
- Rudder: 1x standard servo.
- Elevator: 1x standard servo.
- Landing gear: 1x standard servo.
Complete marking on fuselage and wing made in the
Antares 20 6.6 m, RTF
all molded kit, double carbon
Antares 20, UHM double Carbon wing, 6.6 m, RTF all molded kit
price: 6599.00 U$ (special order)
Antares-20E, 6.6m, all molded, RTF with sls installed, price:inquiry for current pricing
Optional: complete servos package and/or complete servos installation IDS